7 Ways to Save Money Using Plumbing Fixtures — Hometown Station | KHTS FM 98.1 & AM 1220 — Santa Clarita Radio

As a homeowner, you know that expenses can add up quickly, especially if you’re not wise with your spending.

Many homeowners tend to choose the wrong plumbing fixtures based on wrong impressions. For example, some think that a cheap faucet is better than an expensive one. But it’s not always true because you’re wasting everything you’ve saved by calling 24/7 emergency services.

Therefore, it is important to pay close attention to your home’s plumbing as it can save you a fortune over time.

Here are seven effective ways to save money on plumbing fixtures.

1. Install low flow devices

First, don’t confuse low flow with low water pressure when choosing your drain cleaner in Melbourne. Low flow only means reducing unnecessary water consumption.

Low flow faucets tend to use less water than their traditional counterparts while still providing the same performance.

These types of faucets are often more expensive upfront, but they can pay off in the long run by reducing your monthly water bills and helping you conserve water.

This makes them an environmentally friendly and cost-effective choice over the long term.

2. Upgrade to newer toilet models

The latest models are not only more effective, they also look great!

Modern toilets often have a dual flush option that allows you to choose between using a full flush or a half flush to save water.

For a full flush, these modern toilets typically require 1.6 gallons of water. The older toilets also produce up to 6 gallons of water per flush!

Over time, this wasted water can add up to the overall cost in your home.

3. Water-saving faucets

The water consumption per minute is also greatly reduced by water-saving fittings.

The latest models use 1.5 GMP instead of just over 2.2 GMP of typical faucets, saving you up to 30% on your monthly water bill.

If you’re worried about losing water pressure in your sink, consider aerator-equipped faucets, which can save up to a gallon of water per minute while maintaining strong water pressure by blowing air into the stream. Without sacrificing flow, pressure or flushing capabilities, this replaces water.

4. Water saving shower head

It is important to remember that connecting a water-saving shower head does not automatically result in reduced water pressure. A water-efficient showerhead uses only about 2 gallons of water per minute (GPM), compared to the typical showerhead’s consumption of 2.5 GPM.

In just one year, half a gallon of water per day can save you over 1,825 gallons of water! To avoid leaks, make sure the new shower head is firmly seated on the shower arm.

If you need help finding and installing the ideal shower valve for your home, consult an expert.

5. Consider purchasing pressure reducing valves

Ideally yours Plumber at Point Cook should include a water pressure test in their routine maintenance inspection.

The general advice from a plumber is to add a pressure reducing valve if they find the PSI is higher than required (PRV). Residential environments are suitable as typical home installations can operate at 35 psi.

The problem is that many households don’t realize that they are using significantly more pressure than usual. Water pressure can be reduced by installing these valves on your water main. This not only reduces the cause but also helps your pipes last longer.

6. Keep your hot water system running

Water loss can be caused by the distance between your heat source and the outlet.

The farther your heat source is from the outlet, be it your heat pump, water heater or grill, the longer it will take for your hot water to arrive. Water is wasted waiting for the ideal temperature.

Therefore, it is best to turn the pump that directs the water to the drain.

Annual water heater maintenance can also help your water heater last longer, thereby saving you water.

7. Shop smart

You must be savvy when purchasing plumbing fixtures. Choosing the wrong faucet will skyrocket your monthly water bills, which is not good.

Quality should always be a priority, but there are ways to save money without sacrificing quality – look for brands with affordable products that still have longevity and effectiveness.

Keep in mind that cheaper models may not last as long as their higher-priced counterparts, so consider your options carefully before making a purchase decision.

Also, stay away from buying old plumbing fixtures. They use more water than the latest models.

Taking advantage of online discounts from reputable retailers is another great way to save money on plumbing fixtures. Many stores offer discounted prices on select items year-round, so do your research before you buy.

Conclusion

Saving money on plumbing doesn’t have to be complicated – it just takes a little research and savvy shopping skills!

When choosing new items, consider factors such as quality versus price, and take advantage of discounts or offers whenever possible. It ensures you get the best bang for your buck while maintaining high levels of performance and durability over time.

With these tips in mind, you can rest assured that you are making wise decisions when it comes to saving money on plumbing fixtures!

Another good option is to contact a professional plumbing company such as NLK Plumbing at Hoppers Crossing for suggestions on how to make your home more energy efficient. NLK has various specialist plumbers, from commercial plumbers to hot water system experts.

When your plumbing system is water and energy efficient, you automatically save money. So talk to your plumber and get your plumbing system right.

You might also like

Comments are closed.